Elektro-Automatik 33200246, Инструкция по эксплуатации

Страница: 28 / 46

28
EN
Instruction Manual
EL 9000 HP Series
Date: 05-31-2011
About the device
2.2 Device specific data
EL9080-600 HP EL 9160-300 HP EL9400-150 HP EL9750-75 HP
Mains input
Mains voltage
Mains frequency
Mains fuse
DC input
Input voltage U
nom
80V 160V 400V 750V
Input power P
nom
- permanent power
Input current I
nom
600A 300A 150A 75A
Overvoltage protection threshold
max. allowed input voltage
100V 180V 460V 850V
Voltage control
Adjustment range 0…80V 0…160V 0…400V 0…750V
Display resolution 100mV 100mV 100mV 100mV
Accuracy**
<0.2% of U
nom
Current control
Adjustment range 0…I
nom
0…I
nom
0…I
nom
0…I
nom
Display resolution 100mA 100mA 100mA 100mA
Accuracy**
Power control
Adjustment range
0…P
nom
0…P
nom
0…P
nom
0…P
nom
Display resolution 1W 1W 1W 1W
Accuracy**
Resistance control
Adjustment range 1 0…1.2 Ω 0…2.5 Ω 0…2.5 Ω 0…15 Ω
Display resolution 1m Ω 1m Ω 1m Ω 10m Ω
Adjustment range 2 0…25 Ω 0…50 Ω 0…100 Ω 0…300 Ω
Display resolution 10m Ω 10m Ω 100m Ω 100m Ω
Accuracy**
Dynamic values
Current rise and fall time***
Level
Times (pulsed operation)
Rise/fall time
Accuracy**
Trigger input*
Battery test feature
Modes
Battery protection
Display
Display
Analogue interface*
Set value inputs
Monitor outputs
Control signals
Error signals
Outputs
Cooling
Type
Ambient temperature
Terminals
Load input
System Bus
Analogue interface
Dimensions W x H x D
Weight
Supported interface cards
Article number 33 200 246 33 200 247 33 200 248 33 200 251
* for technical specification see section "Analogue interface"
*** Rise and fall time are defined at 10%...90% and 90%...10% of the nominal value
All single values, which specify a tolerance are typical values
2 x 40 characters, illuminated
current / resistance / power
final discharging voltage adjustable
time and consumed battery capacity
2 adjustable, 50us..100s
adjustable, 30us…200ms
<10%
yes, for external level switching
<2% of the selected resistance range, 0,3% of the maximum input current
<50us
2 adjustable levels per control mode
0...10V for U / I / P / R (0...100% set value)
0...10V for U / I (0...100% actual value)
internal/external, input on/off, R range 1 or 2
overvoltage / overtemperature
reference voltage
temperature controlled fans
CAN, USB, RS232, GPIB, Ethernet
0…70°C with derating 20W/°C
rear side, M8 screw terminal
rear side, 7 pole screw clamp
115V/230V switchable
50/60Hz
T2,5A
<0.2% of I
nom
<2% of P
nom
** Accuracy is defined as the max. allowed difference between actual value and set value, always related to the nominal value.
Example: nom. value is 300A and accuracy is given with 0.2%. A set value of 50A may thus result in an actual value of 49.4A...50.6A.
7200W, with temperature related derating
7200W, at 40°C ambient temp.
1.1 * U
nom
<0.1% of U
nom
rear side, 15 pole Sub-D socket
19" x 9U x 460mm
53kg