Lite
9
OPERATION
BUMP
CONFIGURE
Pressing a Bump Button adds an individual Channel or a
Submaster Channel into the console output, based on the
level of the Bump Master.
BUMP SOLO:
Bump Solo mode outputs levels as in normal bump mode,
except all channels not involved with the bump are held at zero
for the duration of the bump.
BUMP ON:
Normal bumps are enabled. Playback level is controlled by the
Bump Master.
BUMP OFF:
Bump buttons are deactivated on the console.
BUMP MASTER:
The Bump Master sets the output level for the channels bumped.
BUMP BUTTONS:
The buttons under the channel sliders allow the operator to force
the channel output to the level selected on the Bump Master.
PLAYBACK
HOLD THE BUMP:
The output level stays constant as long as you hold the button.
HINT:
I
f the channel level is at 25% and the Bump Master is at
FULL, the bumped level is at 100%
CHANNEL BUMPS:
Press the Channel Bumps to set the output level of an individual
Channel into the console output.
Output is based on the level of the Bump Master.