Lite
13
RUNNING AN EFFECT:
Select the desired effect with the PAGE switch.
Set the MODE switch to RUN.
Select the DIRECTION switch to set pattern:
Forward -- 1, 2, 3, 1, 2, 3, 1, 2, 3
Bounce -- 1, 2, 3, 2, 1, 2, 3, 2, 1
Reverse -- 3, 2, 1, 3, 2, 1, 3, 2, 1
Adjust the effect rate with the Rate slider.
Adjust effect output level with the Effect Master slider. The effect
can be faded UP or DOWN.
Use the STEP/HOLD button to temporarily stop a running effect.
OPERATION
EFFECTS
PLAYBACK
Like Submasters, Effects operate outside the Crossfaders.
Effects outputs are controlled by the Grand Master and the
Blackout Switch
USING THE EFFECT AS A SUBMASTER:
The effect package may be used as an additional timed
submaster. To use this function, you must record an effect that
is only one step long.
When the mode is set to RUN or STOP, the effect may be
controlled by the Effect master, and the rate slider will allow for
a fade time. The fade times are the same as for a normal
crossfader.
NOTE: This function will only work if the effect is 1 step long.
