manualshive.com logo in svg

Electronics Diversified Lite, Руководство пользователя, Страница: 16 / 21

Поделиться
Скачать
Electronics Diversified Lite Скачать руководство пользователя страница 16

Lite

16

ACCESSORIES

12-Channel

24-Channel

EDI Part Number:

202-0064

202-0065

36-Channel

48-Channel

EDI Part Number:

202-0066

202-0067

60-Channel

EDI Part Number:

202-0068

EDI Part Number:

HARDCASEXX

EDI Part Number:

25CC 5XLR

EDI Part Number:

25CC 25D

EDI Part Number:

DMXRCU

EDI Part Number:

020-0969

SOFT CONSOLE COVER:

Designed to keep your Lite clean, dust free, and protect the

control surface.

HARD CONSOLE CASE:

Tough, durable locking travel case for transport, or storage of

your Lite.

DMX CONTROL CABLE:

The standard DMX-512 Data Cable is furnished with a 5-pin XLR

style locking connector, 25' in length.  Custom lengths are

available on request.

ANALOG CONTROL CABLE:

The standard Analog Control Cable is furnished with a 25- pin

“D” style connector with locking tabs, 25' in length.  Custom

lengths are available.

DMX REMOTE CONTROL UNIT:

Allows direct dimmer access for focus or dimmer checks without

the control console on line.  This small, hand-held, battery

powered unit simply plugs into the existing DMX-512 data line for

operation.

DMX WINDOWS KIT:

DMX Windows Kit converts the USITT standard DMX-512 signal

into a Super VGA monitor signal directly compatable with any

VGA Color Monitor.

(Monitor sold separately)

Содержание Lite






















Отзывы:

Нет отзывов