Lite
14
OPERATION
SOFT-PATCH
PROGRAMMING THE PATCH:
Press and hold both the PROGRAM and STEP buttons until the
program light blinks rapidly.
Use the Step button and direction switch to select the desired
number.
The STEP display will show the dimmer, and the LED above the
channel bunp buttons will display the current channel
assignment.
Press a different channel bump button to change the patch
assignment, or any Submaster bump to assign the dimmer to
no channel.
Repeat for all desired dimmers
Press the Program button when finished.
When in Patch Mode, the analog outputs will mimic the channel
bump LED's.
NOTE: You cannot Patch Analog outputs!
The Soft-Patch allows you to assign individual DMX512 dimmers
to a control channel. You may patch DMX512 dimmers between
1 and 96.
1 2
SOFT-PATCH
