Lite
12
CONFIGURE
OPERATION
EFFECTS
Effects programs consist of a series of steps which sequence
or repeat the same pattern. For the best visual recognition,
Chase Effect steps should be divisible by the number 3.
PROGRAMMING AN EFFECT:
Select the Effect Page for record using the PAGE switch.
Press PROGRAM until the light blinks.
The step display will now show P2 which reflects the selected
page.
Press the PROGRAM button again to cancel Effects
programming.
Select the "look" for the first step of the effect. The look may be
any combination of console outputs to include channels,
submasters, or combination outputs from the Crossfader.
(99 steps per Effect, maximum).
P2
RECORDING AN EFFECT:
With the "look" output active, press the STEP/HOLD button to
record the step.
The STEP display will indicate the step number recorded.
Select the next "look" for the 2nd step of the effect. The look may
be any combination of console outputs.
A step can be a single channel or a combination of active level
outputs.
Repeat the process for each step.
COMPLETE THE EFFECT:
Press the PROGRAM button to end the program function. The
program LED will go out.
02
