manualshive.com logo in svg

Electromotive TECgt, Руководство пользователя

Пользовательский "Electromotive TECgt" руководство - ваш надежный гид по использованию продукта. С легкостью загрузите его бесплатно с manualshive.com чтобы получить все необходимые инструкции для эффективного использования вашего устройства. Не упустите шанс лучше понять ваш продукт и достичь оптимальных результатов.

Поделиться
Скачать
background image

 

The 

TECgt

 is designed to be fully upgradeable with respect to its software and firmware.  The 

software is the operating system that is used to tune the engine.  The firmware is the embedded code that is 
installed in the 

TECgt’s

 processors.  Small changes in functionality can be covered with software changes.  

Larger changes in functionality, particularly the addition of new features, generally require a firmware 
upgrade.   

Both software and firmware upgrades are available for a nominal fee on our website.  To perform 

the upgrade (that is, to purchase software and firmware upgrades), you will need to know your unit’s serial 
number.  

Software and Firmware upgrades that are purchased with a serial number that does not 

match your unit’s serial number WILL NOT WORK on your unit.

      

 

Software Coding Information 

Electromotive calls its 

TECgt

 Windows software “WinTec 4.X.Y.”  The “4.X.Y” portion of the 

WinTec name is the code that is used to tell what the version of software is made for. 

• 

The “4” means simply the software version 4 platform. 

• 

The “X” digit states the FIRMWARE version on which the software will function. 

• 

The “Y” digit states the latest build SOFTWARE version. 

 

The software version is displayed when the WinTec software is opened on a computer.  Software 

versions are compatible with the firmware version for which they are designed.  For example,  

• 

A  4.0.3 software version is compatible with a 4.0.0 firmware version. 

• 

A  4.1.2 software version is compatible with a 4.1.0 firmware version. 

• 

A  4.1.0 software version WILL NOT run with a 4.0.0 firmware version. 

 

Always use the PC SOFTWARE version for which the FIRMWARE is designed.  The “X” 

digit of the PC software must always match the “X” digit of the Firmware!

 

 

Firmware Coding Information 

 

The Firmware version is displayed in the Engine Monitor Screen.  The firmware code is “4.X.0.T3”    

The “X” digit must match the “X” digit of the software version (see above).  This is the firmware version. 
Firmware for the 

TECgt 

starts with “WTL02”. The next two digits XX are the release version, release 

changes, new feature additions or some other major change will be signified in this number.  The last 3 
digits are the build number. Build number YYY indicates bug fixes from one release level to the next. 
Example : where firmware file number “WTL02xxyyy”  XX is the release number, YYY is the build 
number.      
 
 

Software Upgrade Procedure 

 

As was previously stated, the firmware and software versions are completely upgradeable through a 

simple software download from the Electromotive website.  Software upgrades are simple, and can be 
accomplished with the following steps. 
 

1.  Download the software from the Electromotive website onto a PC. 
2.  Install the new WinTec software onto the PC that you will use for tuning your engine. 
3.  Open the NEW WinTec software version on the PC, and open the OLD calibration file (the 

*.bin file) into the NEW WinTec software. 

4.  The main values from your old *.bin file should be transferred directly.  However, for safety, 

ALWAYS make sure that the old *.bin values are the same as the new values. 

______________________________________________________________________________________ 
TECgt   Manual Version 2.0 

- Page 123 - 

©2008 Electromotive, Inc. 

 

Содержание TECgt





































































































































Отзывы:

Нет отзывов

Похожие инструкции для TECgt

S&C 6800 Series Instruction Sheet preview
6800 Series
Бренд: S&C Страницы: 40
TCS Basys Controls QD Series Troubleshooting Worksheet preview
QD Series
Бренд: TCS Basys Controls Страницы: 2
Bartlett Genesis LT3140 Technical Manual preview
Genesis LT3140
Бренд: Bartlett Страницы: 5
Eaton ePDU G3 Installation & Quick Start Manual preview
ePDU G3
Бренд: Eaton Страницы: 2
Eaton ePDU G3 Manual preview
ePDU G3
Бренд: Eaton Страницы: 2
Eaton PowerXL DX-NET-ETHERCAT-2 Instruction Leaflet preview
PowerXL DX-NET-ETHERCAT-2
Бренд: Eaton Страницы: 3
GAI-Tronics Elemec3 013-02-0095-002 Manual preview
Elemec3 013-02-0095-002
Бренд: GAI-Tronics Страницы: 12
IBC MVE2 Series Quick Start Manual preview
MVE2 Series
Бренд: IBC Страницы: 8
Yolink YS4803-UC User Manual preview
YS4803-UC
Бренд: Yolink Страницы: 23
Bardiani Valvole BBZO BBZOG Instruction Manual preview
BBZO BBZOG
Бренд: Bardiani Valvole Страницы: 24
Anritsu MU120119A Operation Manual preview
MU120119A
Бренд: Anritsu Страницы: 54
Governors America ESD2300 Series Quick Start Manual preview
ESD2300 Series
Бренд: Governors America Страницы: 6
SKF Ecomag Installation, Operation And Maintenance Manual preview
Ecomag
Бренд: SKF Страницы: 11
Quectel EC200A Series Hardware Design preview
EC200A Series
Бренд: Quectel Страницы: 97
Danfoss VT2800 Series Design Manual preview
VT2800 Series
Бренд: Danfoss Страницы: 162
Phoenix Contact 2297031 Manual preview
2297031
Бренд: Phoenix Contact Страницы: 56
Phoenix Contact FL EPA 2 User Manual preview
FL EPA 2
Бренд: Phoenix Contact Страницы: 40
FMS 109753-KIM Manual preview
109753-KIM
Бренд: FMS Страницы: 108

Бренды по названию

Популярные бренды

Загрузить еще бренды