12
Starting up and temperature regulation
☞
1. Insert the plug into the plug socket. When the refrigerator compart-
ment door is opened, the internal lighting is switched on.
2. Press ON/OFF button.
The green mains pilot indicator
and the temperature display
illuminate.
3. Press either the „+“ (WARMER) or „-“ (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
4. Set the required temperature by pressing the „+“ (WARMER) or „-“
(COLDER) buttons (see section "Temperature setting buttons"). The
temperature display will immediately show the changed setting. With
each further press of one of the two buttons, the DESIRED tempera-
ture is adjusted by 1°C.
Adjustable temperature range:
+3°C
to +8°C.
Note: From a food
safety
point of view, +5°C for the refrigerator com-
partment should be considered cold enough as a storage temperature.
5. Once the required temperature has been set, after a short period
(approx. 5 sec.) the temperature display will change and again indicate
the current ACTUAL temperature inside the fridge. The display will
change from flashing to continuous illumination.
The compressor will start and then run automatically.
Information! When the setting is changed, the compressor does not
start immediately if automatic defrosting is currently taking place.
Goods to be refrigerated can be loaded immediately after switching
on, because the storage temperature in the refrigerator is quickly
reached.
In the LONGFRESH 0°C compartment the temperature is controlled
automatically. It stays constantly at about 0°C, no adjustment is neces-
sary.
Note: The refrigerator compartment is fitted with a fan.
This quickly
cools food stuffs and ensures
optimal distribution of the temperature
between the fridge and the LONGFRESH 0°C compartment.
This results in the fan operating at different speeds for different
lengths of time. This is quite normal and not a fault with the appli-
ance.