G
Change of
type of gas
Adjustment of
the adjust-
ment screw
from natural
gas to liquid
gas
fully tighten the
adjustment
screw
from liquid gas
to natural gas
release the ad-
justment screw
approximately
3/4 of a turn
4.
Attach the gas oven control knob.
5.
Put the mains plug into the mains
socket.
WARNING!
Only put the mains plug into the
mains socket after you put back
all the parts into their initial posi-
tions.
6.
Light the gas oven burner (see "Gas
oven cooking - Ignition of oven gas
burner").
7.
Set the gas oven control knob to 240
and let the oven heat for 10 minutes
minimum.
8.
Turn the gas oven control knob from
240 to minimum.
Control the flame. If the flame goes out,
do the procedure from point 1 to point 7
again. There must be a small regular
flame on the gas oven burner crown.
The manufacturer is not responsible if
you do not follow these safety meas-
ures.
13.5
Building-in the appliance
Conditions for building-in:
• Only set up the appliance in a kitchen
or in a kitchen-dining room.
• Do not set up the appliance in a bath-
room or a bedroom.
• You can install the appliance "built-in"
or "built-under":
570
594
590
560
540
2
20
min.
550mm
580mm
130cm²
560-570mm
110mm
65cm²
x2
min.
550mm
560-570mm
593mm
min. 4mm
110mm
130cm²
65cm²
x2
20 www.electrolux.com
