Electrolux EILFU17GS, Техническое и сервисное руководство

Страница: 48 / 96

5-8
C Co om mp po on ne en ntt T Te ea arrd do ow wn n
Figure 5-18. Evaporator Cover Removal
B Ba afffflle e P Plla atte e R Re em mo ov va all
The baffle plate is secured with a retaining clip on
each end to an opening in the compartment back
wall. (See Figure 5-16)
To remove the baffle plate, with one hand grab the
baffle plate from the center and pull while pushing
with the other hand from the side towards center
of the baffle plate.
IIc ce e M Ma ak ke err R Re em mo ov va all
The icemaker is mounted with two 1/4” hex head
screws to the upper left hand corner of the freezer
compartment. (See Figure 5-17)
To remove the ice maker:
1. Remove uppermost glass shelf and ice bucket.
2. Using a 1/4” extended socket or nut driver,
extract the two screws securing the icemaker
to the left sidewall of the unit.
3. Disconnect wire leads from icemaker at the
quick disconnect mounted in the upper left
corner of the freezer compartment.
E Ev va ap po orra atto orr C Co ov ve err R Re em mo ov va all
The evaporator cover is secured with screws to the
back wall and bottom of the freezer compartment.
The evaporator cover has a gasket on each side to
create proper airflow in the compartment.
(See Figure 5-18)
To remove the evaporator cover:
1. Remove the bottom two glass shelves.
2. Remove the wire baskets and slide
assemblies.
3. Using a phillips head screwdriver, extract the
ten (10) screws securing the evaporator cover
to the freezer compartment.
4. Carefully pull the evaporator cover away from
the back wall, using caution not to damage the
gaskets on both sides of the evaporator cover.
Figure 5-16. Wire Basket and Slide Removal
Baffle Plate
Gasket
Screws
Screws
Electrical Connection
Push Towards Center
Figure 5-17. Ice Maker Removal