![Electrolux EFP7 Series Скачать руководство пользователя страница 44](http://html.mh-extra.com/html/electrolux/efp7-series/efp7-series_instruction-book_96197044.webp)
ES
FI
Troubleshooting
Problem
Possible cause
Solution
Slices are slanted or uneven.
The food is light, it jumps during slicing.
Load food in the filler hole. Place big / small pusher onto
food and apply pressure. Then start.
Some food remained on the disc
after processing.
It is normal for small pieces to remain after processing.
Always clear any blocked food from chipper disc by
yourself.
The motor slows down during
operation.
Amount of dough may exceed maximum capacity.
Remove half and process in two batches.
Dough may be too wet, it sticks onto the side of the bowl. Add more flour, 1 tablespoon at a time until the motor
speeds up. Process until dough cleans the side of the bowl.
The motor slows to start with
S-blade.
Amount of meat may exceed maximum capacity.
Remove the meat and process in two batches.
Too much fat in the meat.
Note that for best result trim the meat of fat before
processing.
The motor does not work.
There is a safety interlock switch to prevent the motor
from starting if it is not properly assembled.
Make sure the processing bowl, lid are securely locked
into position. Make sure that the large pusher is correctly
placed into the large feeding tube.
The appliance is not connected to the mains.
Make sure to plug in the appliance before operation.
The food processor shuts off during
operation.
The lid may have become unlocked.
Check to make sure it is securely in position.
The food processor vibrates/moves
during operation.
The rubber feet are wet.
Make sure the rubber feet at the bottom of the unit are
clean and dry.
It is normal for heavy loads (e.g heavy dough, cheese).
Remove half and process in two batches.
The products stops working when
processing a large dough.
The motor is overheated because of heavy load.
Let the motor cool down and the safety switch will allow
to run the motor again.
EE
EN
Veaotsing /
Tunnus
Põhjus
Lahendus
Viilud on kõverad või ebaühtlased. Tegemist on kerge toiduainega, mis hakkab viilutamise
ajal hüppama.
Sisestage toiduained täiteavasse. Asetage väike/suur
suruja toiduainete peale ja suruge. Seejärel käivitage.
Pärast töötlemist on jäänud
kettale veidi toitu.
See on normaalne – väikesed toidukogused võivadki
kettale jääda.
Kinnijäänud toit tuleb viilutusketta küljest alati
eemaldada.
Mootori töö aeglustub kasutamise
ajal.
Taigna kogus võib olla maksimumkogusest suurem.
Eemaldage pool taignast ja töödelge kaks kogust eraldi.
Taigen sisaldab liiga palju vedelikku ja see jääb nõu seinte
külge kinni.
Lisage jahu (1 spl korraga), kuni mootori töö läheb
kiiremaks. Töödelge tainast niikaua, kuni see nõu seinte
küljest lahti lööb.
S-teraga töötlemist alustades
mootori töö aeglustub.
Liha kogus võib olla ette nähtud suurem.
Eemaldage pool lihast ja töödelge kaks kogust eraldi.
Liha on liiga rasvane.
Parima tulemuse saamiseks tuleks liigne rasv enne
töötlemist eemaldada.
Mootor ei tööta.
Seadmel on sisemine turvalukk, mis takistab mootori
käivitumise, kui seadme osad pole õigesti paigas.
Veenduge, et nõu ja kaas on turvaliselt kohale
lukustunud. Veenduge, et suurem suruja on õigesti suurde
täiteavasse paigaldatud.
Seade ei ole vooluvõrku ühendatud.
Veenduge, et lülitasite seadme enne kasutamist sisse.
Köögikombain lülitub kasutamise
ajal välja.
Kaas võib olla lukust lahti tulnud.
Kontrollige, kas see on korralikult paigas.
Köögikombain vibreerib/liigub
kasutamise ajal.
Kummist tugijalad on märjad.
Veenduge, et seadme all olevad kummist tugijalad oleksid
puhtad ja kuivad.
Tugevat töötlemist vajavate toitude puhul (kõvem taigen,
juust) on see normaalne.
Eemaldage pool taignast ja töödelge kaks kogust eraldi.
Suure taignakoguse töötlemisel
toode seiskub.
Mootor on suure koormuse tõttu ülekuumenenud.
Laske mootoril jahtuda, kuni turvalüliti võimaldab teil
selle uuesti käivitada.
www.electrolux.com
44
EFP7xxx_Pragati_FoodProcessor_Electrlx_rev2.indd 44
2015-01-15 11:03:52