6.5. Input philosophy: program run
l
Cycle start
w
3 seconds after the last key actuation respectively after the set start time has run down,
the selected washing cycle will start automatically when the door has been closed.
w
From that moment it is no more possible to select a time preselection resp. a program
option.
F
cancel resp. delete cycle
(see description page B 6 / "Delete cycle")
F
change resp. alter cycle
(see description page B 7.2 / "Alter cycle")
l
Cycle run
w
Appliances with display
w
LED LD1, LED of the selected washing cycle as well as run time LED are lit
during the whole cycle run.
w
The display indicates the still remaining washing time in minutes.
w
The run time is updated depending on the program. The update is executed in changing
program parts. In doing so, the run time can correct in jumps downward or the indication
is stopped until the time has been synchronized again.
w
Depending on the equipment of the appliance, the cycle run LEDs (PAA) indicate the
currently active program part.
For that the corresponding PAA LED is flashing up pulsating (2 sec. on / 400mS off).
w
Appliances without display, but with PAA LEDs:
w
LED LD1, LED of the selected washing cycle as well as run time LED are lit
during the whole cycle run.
w
By means of the cycle run LEDs (PAA) the currently active program part is indicated.
For that the corresponding PAA LED is flashing up pulsating (2 sec. on / 400mS off).
l
Cycle end
w
Appliances with display:
w
The confirmation LED for the program key of the run-down cycle and the display LD1
of the ON/OFF key continue to be lit.
w
The display indicates "0" and the run time LED is lit.
w
If there is a cycle run display depending on the variant, also the "end" LED is lit.
w
Appliances without display, but with PAA LEDs:
w
The confirmation LED for the program key of the run-down cycle and the display LD1
of the ON/OFF key continue to be lit.
w
The "end" LED is lit in the cycle run display.
w
If the appliance is equipped with a buzzer and this one is activated, there will be an end signal
when the cycle end has been reached, which is a whistling sound with the following interval:
15 seconds on - 3 minutes off - 15 seconds on - 3 minutes off - 15 seconds on - completely off
The end signal is cancelled immediately by opening the door.
w
When the cycle end has been reached, it is possible to delete the run-down cycle by opening
and closing the door. After closing the door, the appliance is automatically again in the
"prestart" mode.
w
When opening the door all indications remain on the panel, as far as the appliance is not
switched off by the ON/OFF key S1.
w
In order to switch off the appliance completely you have to actuate the ON/OFF key S1.
The run-down cycle is deleted even in this case. All displays go out.
S1
Ein/Aus
LD1
S2
S3
S1
Ein/Aus
LD1
PROG.TIME
0
END
vertical key arrangement
horizontal key arrangement
PROG.TIME
0
END
S1
Ein/Aus
LD1
S2
S3
S1
Ein/Aus
LD1
END
vertical key arrangement
horizontal key arrangement
END
