Electrolux Professional SKCH 100, Руководство по обслуживанию

Страница: 105 / 149

DOC NUMBER 595R495 105
SERVICE MANUAL Blast Chiller Freezer 100 - 200
6.3.3 Front panel
Phases to access the components of the electrical box and the components below
.
After removing the control panel as specified in the "Control Panel" paragraph:
4. Remove the electrical box cover by loosening the 4 side screws (Figure 1 phase 1).
5. Remove the insulating paste and respective insulation below (Figure 1 phase 2).
6. Cut the sealing clamps of the mass of connection cables (Figure 2 phase 1).
7. Disconnect the blast chiller power cable (Figure 2 phase 2).
8. Remove the cable cover inside the blast chiller (Figure 3 phase 1), removing the insulation inside it.
9. Remove the two covering profiles of the heating cables as shown in Figure 4 phase 1, paying attention to
the insulating paste which must then be reapplied in the reassembly phase. Loosen the 4 screws securing
the electrical box (Figure 4 phase 3).