50
Sound
This setting allows to set:
• the volume level from “0“ to “5“;
• enable / disable the End-cooking sound (
/
);
• choose and set the “End-cooking“ jingle.
Cavity light
This setting allows to enable / disable the cavity light (
/
)
• Set the brightness from 0 to 100 %;
• Enable / disable the end-cooking blinking light;
• Enable / disable the Alarm blinking light;
• Enable / disable the Preheat blinking light.
Display
This setting allows to:
• adjust the brightness of display from “0“ to “100“%
• set the sleep timeout value (minutes/seconds).
Touch screen calibration
This setting allows to set the calibration of the screen.
1. Touch the screen as close as possible to the centre of the
red cross;
2. Repeat until the cross turns green;
3. Touch and hold to exit;
Touch screen test
• Touch the points required to test the screen.
• Hold down to exit.
Food safety
This setting allows to enable / disable (
/
) the following
parameters:
FSC Safety Control (FSC)
The FSC feature guarantee the microbiological safe condition
of the food. If the FSC function is enabled it will be possible to:
• Enable/disable the visualisation of the “F“ factor;
• Enable/disable asking for FSC set on start.
HACCP
• The HACCP feature allows the storage of all the set values
identifying a cooking process, and their variation, the cavity
temperature and, when used, the food core temperature at
specific intervals.
Autostart
This setting allows to enable / disable (
/
) the Autostart in
all modes.
Measurement units
Temperature
°C
°F
SETTINGS
USER
Display
Brightness
100%
Sleep timeout
s
1 2 3
4 5 6
7 8
0
9
015 0
: 0
SETTINGS
m:s
Touch the screen as close as
possible to the center of the red
cross. Repeat until the cross turns
green. Touch and hold to exit.
-1
-1
-1
-1
50
50
1
2
3
4
Touch to test. Hold down to exit.
Food safety
Enable Food Safety Control (FSC)
Enable HACCP
Ask for FSC set on start
Show F value during cooking
SETTINGS
riduzione figura in scala
del 20,5 %
Autostart
Start cooking by closing the door
SETTINGS
