26
Installation Manual
Mounting System / Selecting Mounting Location
3.2.1. SELECTING MOUNTING LOCATION
•
Refer to Section 3.2 'Clearances & Knockouts Locations' to ensure
the placement of the inverter does not exceed the cable lengths.
•
Keep the inverter away from high-heat sources. Ambient
temperature should be lower than 40°C. (High ambient
temperature will cause power derating of inverter.)
•
It is recommended that the installation of the inverter should
be prevented from direct sunlight, snow, rain and other negative
influences which may cause function impact or life aging.
Refer to the 'Clearances and Knockout Locations' section when
mounting and installing the inverter. The following considerations
must be taken into account before selecting where to install:
•
Inverter should be installed vertically or lie on a slope by a max of
15°.
•
Any part of this system shouldn't block the switch and breaker
from disconnecting the inverter from DC and AC power.
•
Inverter should be installed on a solid surface, where it is suitable
for inverter's dimensions and weight.
•
Product label on inverter should be clearly visible after installation.
Do not damage the label.
•
Do not install the inverter when it is snowing or raining. If you
have to, pay attention to the waterproof and moisture-proof of the
inverter and distribution box.
•
Leave enough space around the inverter according to 3.2.
CLEARANCES & KNOCKOUT LOCATIONS for natural heat
dissipation.
