13
Installation Manual
Safety Warnings
MULTIPLE WARNINGS.
NOTE!
Method of active anti-
islanding protection: The Inverter monitors for sudden
changes in the impedance of the grid by looking for
changes in the second to the eighth harmonic.
Perform installation and wiring in accordance with all
applicable local electrical codes and standards.
Protection against lightning and resulting voltage surge
must be in accordance with local standards.
Using unapproved attachments or accessories could result in
damage or injury and could result in voiding the warranty.
Use Class 1 wiring methods for field wiring connections
to terminals of a Class 2 circuit. Select the wire size based
on the protection provided by the circuit breakers / fuses.
Install properly rated over current protection as part of the
system installation.
To ensure optimal reliab
i
lity and to meet warranty
requirements, the Inverter must be installed and/or stored
according to the instructions in this guide.
In the event that Inverter, one or more batteries or PowerPod 2 is
defective and needs to be removed, replaced, temporarily uninstalled,
disposed of, decommissioned or if Electriq Power Customer Support
authorizes a replacement (RMA), perform the following steps:
1.
Follow installation and service shut down.
2.
Contact Electriq Power Customer Support at [email protected].
WARNING:
Users should not attempt to service the
PowerPod 2.
Only an authorized technician should attempt to service
the PowerPod 2.
WARNING:
Risk of injury and equipment damage. Protect
the PowerPod 2 from damage and improper use.
WARNING - ARC FLASH AND SHOCK HAZARD:
Appropriate PPE and Tools Required (protective eyewear
and gloves) while working on the energized equipment.
Voltages up to 600 VDC and 240 VAC Present. Arc Flash
Approach Boundary 1.0 m. Arc Flash Prohibited Approach
Boundary 24 mm.
