11
Installation Manual
BATTERY PACK WARNINGS:
There is danger of generating heat / smoke / rupture flames.
Do not disassemble battery pack.
Do not touch disassembled battery pack.
Do not reassemble battery pack.
Do not immerse the battery pack in any liquids or get it wet.
Do not short circuit battery pack.
Do not incinerate or heat the battery pack.
Do not use or leave the battery near a fire, stove or heated
place.
Do not impact the battery pack or throw it.
Do not use a damaged and/or deformed battery pack.
Do not drive sharp objects into the battery pack, strike it with
any object or stand on it.
Do not place the battery pack on materials such as tools,
electric wire, screws, etc.
In case of a leak in the battery pack, avoid contact.
Do not touch your eyes if accidental contact with leaky
battery.
Do not expose to corrosive substances such as sea breeze,
steam or chemicals.
Do not install in humid places or places with condensation.
Do not install outdoors in climates where the temperature
drops below 0°C (32°F) for extended periods.
Do not install in direct sunlight.
Do not install or use the PowerPod 2 if it has been damaged
in any way.
The ambient temperature
(charging) must be between 0°C
and 55°C; discharging temperature
must be between -20°C and 55°C;
relative humidity must be between
10% and 90% to ensure optimal
operation. Do not operate where
the temperature and humidity are
beyond the specified limits. High
ambient temperature above 40°C
will cause power derating.
Safety Warnings
SOC
Charge/Discharge Rate
>80%
Charge rate will gradually
slow down until SOC
reaches 100%
0% to
100%
Charge rate is derated
when temperature is
below 10° C (i.e. 50° F)
0% to
100%
Charging will stop when
cell temperature goes
below or at 0° C (32° F)
0% to
100%
Discharging will stop when
cell temperature goes
below -20° C (-4° F).
