MANUAL ELDES ESIM364 V1.2
27
Yellow LED
SYSTEM
indicates system faults.
SYSTEM
LED indications are mentioned in the table below.
SYSTEM LED
Description
Illuminated continously
One ore more zones or tampers are violated; other
system faults
Flashing
One or more high-numbered zones are violated
In order to find out more on the particular system problem please , enter command A. After this procedure the system
will activate red zone LEDs for 15 seconds. The description on each LED indication is mentioned in the table below.
Zone LED
Description
1
Main power supply is lost
2
Backup battery voltage is 10.5V or lower
3
Backup battery is not present or the battery voltage runs below 5V
4
Backup battery resistance is 2Ω or higher
5
Siren is disconnected/broken
7
One or more tampers are violated
8
Date/time not set
9
GSM connection is lost
10
One or more high-numbered zones (Z13 - Z76) are violated
11
GSM antenna is disconnected/broken
12
Wireless antenna is disconnected/broken
In order to find out which particular high-numbered zone is violated please , enter command B.
In order to find out which particular tamper is violated please , enter command C.
A. System fault indication - enter command:
[CODE#]
B. Violated high zone indication – enter command:
[CODE1]
C. Violated tamper indication – enter command:
[CODE2]
The number of violated high-numbered zone or tamper can be calculated using the table below according to the formu
la: number from zone LED section B + number from zone LED section A.
Example:
LED #3 from section A is flashing and LED #8 from section B is illuminated continuously. According to the table
below LED #8 is equal to number 18, therefore 18 + 3 = 21.
Result
: Violated high-numbered zone or tamper number is 21.
Zone LED section - A
(flashing)
Zone LED section - B
(illuminated continously)
Zone LED 1 = 1
Zone LED 7 = 12
Zone LED 2 = 2
Zone LED 8 = 18
Zone LED 3 = 3
Zone LED 9 = 24
Zone LED 4 = 4
Zone LED 10 = 30
Zone LED 5 = 5
Zone LED 11 = 36
Zone LED 6 = 6
Zone LED 12 = 42
EKB3/
EKB3W
