MANUAL ELDES ESIM364 V1.2
13
3.2.3 Disarm & Turn off the Alarm by SMS text message
1. The system will initiate the entry delay countdown (by default – 15 seconds) after the user has entered the
secured area. Entry delay countdown is intended for user to enter a valid user password before the alarm is
caused.
2. To disarm the system or turn off the alarm, send the following SMS text message to the system‘s phone number
from any out of 10 preset user phone numbers:
SMS text message content:
ssss_DISARMp
or
ssss_DISARMp,p,p,p
Value:
p
- partition number, range - [1... 4]
Example:
1111_ARM1,3,4
3. When the system is successfully disarmed, it will reply with confirmation by SMS text message to the user
phone number that sent the SMS text message.
1. Leave the secured area.
2. To arm the system, send the following SMS text message to the system‘s phone number from any out of 10 preset
user phone numbers:
SMS text message content:
ssss_ARMp
or
ssss_ARMp,p,p,p
Value:
p
- partition number, range - [1... 4]
Example:
1111_ARM1
3. When the system is successfully armed, it will reply with confirmation by SMS text message to the user phone
number that sent the SMS text message.
4. When attempting to arm the system in case of violated zone / tamper presence, the system will reply with
violated zone / tamper number. For more details, please refer to chapter
3.5 Bypassing & Activating Zones.
3.2.2 Arm by SMS text message
Fig. No. 8
User
ESIM364
SMS
SMS
SMS
Fig. No. 9
User
ESIM364
SMS
SMS
SMS
