background image

MANUAL ELDES ESIM364 V1.2                                  

21

By, default configuration the system sends an SMS text message containing violated zone or tamper number in case 

of alarm. The SMS text message can also contain a star * character next to the violated tamper in case the tamper 

violation is caused due to wireless connection loss between ESIM364 and a wireless device (if any).

This SMS text message is sent to User 1. The system sends the SMS text message to the next preset user (presumably 

to User 2) in a row only if the previous user was unreachable (the system did not receive a successful SMS text mes

­

sage delivery confirmation in 20 seconds from the recipient). This routine is continued until one of the preset users is 

reach able, but will not go in a circle i. e. return to User 1 if none of the users were reachable. The SMS text messages 

will cease to be sent to the user as soon as the system is disarmed.

By default configuration, the system makes a phone call to User 1 in case of alarm. By answering the call, the user is 

able to listen on his/her mobile phone to what is happening in area surrounding ESIM364 unit. This feature is pro­

vided by a microphone (if any) connected to ESIM364.

The phone call is made to the next preset user (presumably to User 2) in a row in case the previous user was unreach

­

able (was “out of radio coverage”, provided “busy” signal or did not answer the call). This routine is continued until one 

of the preset users is reachable, but will not go in a circle i. e. return to User 1 if none of the users were reachable. In 

addition, the system will not make a phone call to the next preset user in a row if the previous user was reachable, but 

rejected the phone call. The phone calls will cease to be made to the user as soon as the system is disarmed.

3.4 Alarm Indications & Viewing Violated Zones / Tampers

Fig. No. 26

User

ESIM364

CALL

Fig. No. 27

User

ESIM364

SMS

See also chapter

 3.6 Viewing System Information.

SMS

NOTE: 

Your alarm system installer may have configured the system to make the phone calls to the next available user even if the 

previous one has answered the call.

NOTE: 

Your alarm system installer may have configured the system to send the SMS text message to the next available user even 

if the previous one has received it.

Содержание ESIM364

































Отзывы: