Eldes ESIM252, Руководство пользователя

Страница: 29 / 36

USER MANUAL ELDES ESIM252 V1.0 29
FOR ADVANCED USERS
All these features can be configured using program “ELDES Configuration Tool“
Value (CnVal) – table of values
Cn – command
name (2 letters)
Val – possible
command
meaning.
Command description
Initial factory
default values
Comments
Enabling/
disabling
confirmation call
(CallBack)
CB 1
Confirmation call mode
is enabled for all users.
CB1 means that when users control the
output via SMS message they are notified
about a successful output status change
by a confirmation call.
CB 0
Confirmation call mode
is disabled for all users.
CB0
Disabled for all
users NO1-NO5.
CB0 means that when users control
the output via SMS message they will
not receive a call informing about a
successful output status change.
Confirmation call
duration
CT
1; s
All users receive
confirmation call when
the output is turned on;
s- call time in seconds
СT12
The first digit is a command; the last digit
refers to call time in seconds. E. g. СT12
means that if confirmation call mode is
enabled the call will be forwarded to the
user who is trying to turn on the output.
The system will call for 2 seconds.
0; s
All users receive
confirmation call when
the output is turned off;
s- call time in seconds
СT08
The first digit is a command; the last digit
refers to call time in seconds. E. g. СT08
means that if confirmation call mode is
enabled the call will be forwarded to the
user who is trying to turn off the output.
The system will call for 8 seconds.
Enabling/
disabling
confirmation
SMS message
(SMS confirm)
SB 1
Confirmation SMS
mode is enabled for
all users.
SB1
Enabled for all
users NO1-NO5.
SB1 means that when all users control
the output via SMS message they will
be informed about a successful output
status change by a confirmation SMS
message.
SB 0
Confirmation SMS
mode is disbled for all
users.
SB0 means that when all users control
the output via SMS message they will not
be informed about a successful output
status change by SMS message.
Example of SMS message configuring C2 output ways of information:
This message configures C2 output parameters when controlled via SMS messages.
CB1 means that when the user turns on/off output С2, he/she receives a short confirmation call (Call Back).
CT13 means that when the output is turned on, confirmation call duration is 3 seconds.
CT06 means that when output is turned off confirmation call duration is 6 seconds.
SB1 means that confirmation message is sent informing about turning the output on/off.
To see the preset values for any command send SMS message with the same format that you use when changing parameters; only
Value structure will have no value:
XXXX – user password. OCSx - output control by SMS; value can be OCS1 (C1 output) or OCS2 (C2 output). Value structure is CnVal,
when Cn is command name (2 letters).
E. g. XXXX_SMSEXTRA:OCS2:CB,CT,SB
XXXX_SMSEXTRA:OCS2:CB1,CT13,CT06,SB1
XXXX_SMSEXTRA:OCSx:Value1,Value2,……,ValueN