Eldes ESIM252, Руководство пользователя

Страница: 18 / 36

18
E. g. 2.
The user wants to connect ESIM252 system to the outputs PGM of an existing alarm system. House area is entered through
automatically controlled gates. There are 5 users in total. NO1 is the housekeeper, NO2 is a neighbour, NO3-NO5 are family
members.
As per factory default settings SMS message sending feature in the case of alarm is enabled for all users until the first successful
delivery of the SMS message, it is necessary to enable mandatory SMS message delivery (see more in chapter 3.7) and to remove
the users who should not receive alarm messages. Besides, as per factory default settings, calling feature in the case of alarm is also
enabled for all users therefore call function must be disabled for users NO2-NO5 and left enabled for NO1 only.
a) First of all alarm system unit must be programmed in the way so that when security sensors are violated the signal must be
transmitted to alarm system system unit output PGM.
b) Output PGM is connected to ESIM252 input Z1
c) The following two configuration SMS messages must be sent to Esim252 system:
where SMSALL enables mandatory SMS message delivery for all users.
Where SC345 means that alarm SMS message sending is disabled for users NO3, NO4 and NO5 after input Z1 is violated.
CC2345 means that alarm calls are disabled for all users except NO1 after input Z1 zone is violated.
Task NO1:
Configuring the system so that house alarm activation is reported to the housekeeper (NO1) by SMS message and a call as well as
to the neighbour (NO2) but by SMS message only.
XXXX_SMSALL:ON
XXXX_SMSEXTRA:Z1:SC345,CC2345
Housekeeper
NO1
Neighbour
NO2
Family members:
NO3 NO4 NO5
Alarm system
ESIM151
Alarm
SMS
Alarm
SMS/Calls
PIR PIR
PIR PIR
PGM
GATES
FOR ADVANCED USERS
All these features can be configured using program “ELDES Configuration Tool“