Eldes EPIR2, Руководство пользователя

Страница: 37 / 64

37 37
EPIR2 User Manual v.1.4
PGM Output Settings**
Function Command Value Range / Comment Example
Rename PGM
output
XXXX_Cn:
NewNameHere
Cn = [C1... C32] 1111_C2:Pump
Turn ON PGM
output / set PGM
output startup
status to ON
XXXX_Cn:
ON or XXXX_
OutputName:ON
Cn = [C1... C32] 1111_Pump:ON
Turn OFF PGM
output / set PGM
output startup
status to OFF
XXXX_Cn:
OFF or XXXX_
OutputName:OFF
Cn = [C1... C32] 1111_C3:OFF
Turn ON PGM
output for a speci-
fied time period
XXXX_Cn:ON:
HH.MM.SS or XXXX_
OutputName:ON:HH.
MM.SS
Cn = [C1... C32]; HH = hour,
[00... 23]; MM = minutes, [00...
59]; SS = seconds, [00... 59]
1111_C3:ON:
13.23.48
Turn OFF PGM
output for a speci-
fied time period
XXXX_Cn:
OFF:HH.MM.SS or
XXXX_OutputName:
OFF:HH.MM.SS
Cn = [C1... C32]; HH = hour,
[00... 23]; MM = minutes, [00...
59]; SS = seconds, [00... 59]
1111_Pump:OFF:
15.20.01
**- The EPIR2 system supports wireless PGM outputs allowing connection and control of various
electrical appliances: water pumps, heating, lighting, blinds etc. The maximum number of PGM
wireless outputs which can be connected to the EPIR2 system is 32.
Alarm Duration Settings
Function Command Value Range / Comment Example
Change system
alarm duration
XXXX_SIREN:T T = [0... 5]
vale is in minutes
1111_SIREN:4
Check system
alarm duration
XXXX_SIREN The system will reply to the
user who sent the SMS/text
message, with the current
alarm duration set
1111_SIREN
System Status Information
Function Command Value Range / Comment Example
Check the status
of your system
XXXX_INFO The system will reply to the user who
sent the SMS/text message, with the
following up-to-date
information:
• system date & time;
• system status (armed/disarmed);
• GSM signal strength level;
• main power supply status;
• state of zones (OK/alarm).
1111_INFO
NOTE: The underscore symbol ‘_’ in these instructions represents a space. So when typing an
SMS/text message, replace the underscore symbol with a single space.