Eldes EPIR2, Руководство пользователя

Страница: 36 / 64

36 36 EN
EPIR2 User Manual v.1.4
Zone Settings
Function Command Value Range / Comment Example
Edit zone alarm
text
XXXX_Zn:
NewTextHere
Zn = [Z1... Z34] 1111_Z1:
Motion_detected
Disable a zone XXXX_Zn:OFF Zn = [Z1... Z34] 1111_Z5:OFF
Enable a zone XXXX_Zn:ON Zn = [Z1... Z34] 1111_Z7:ON
Change the entry
delay timer
XXXX_
ENTRYDELAY:n,YY
n = [Z1... Z34],
YY = [0... 65535]
value is in seconds
When you enter your protected
building, you have to disarm the
system within a specified time
to avoid activating the alarm
(manufacturer pre-set default is
15 seconds). During this time the
detector will ignore any motion.
This period is called entry delay.
By default, while the time-out is
running, the LED will bling once
a second.
1111_
ENTRYDELAY:1,25
Disable the entry
delay timer
XXXX_
ENTRYDELAY:Zn,0
Zn = [Z1... Z34] 1111_
ENTRYDELAY:5,0
Check your
system and zone
status
XXXX_STATUS The system will reply to the
user who sent the SMS/text
message, with the following
up-to-date
information:
• system status (armed/dis-
armed);
• status of zones & PGM outputs
(ON/OFF);
• zone alarm texts;
• PGM output names.
1111_STATUS
NOTE: The underscore symbol ‘_’ in these instructions represents a space. So when typing an
SMS/text message, replace the underscore symbol with a single space.