Eldes EPIR2, Руководство пользователя

Страница: 2 / 64

22 EN
EPIR2 User Manual v.1.4
SAFETY INSTRUCTIONS
Valid for EPIR2 v1.01.11 and up
(later referred to as ‘the EPIR2’, ‘the system’, ‘the device’ ‘the unit’ or ‘the detector’)
Please read and follow these safety guidelines to safeguard yourself and others:
• DO NOT use the system where it can interfere with other devices - such as medical devices
•
The alarm system radio transceiver operates in the GSM850, GSM900, GSM1800 and
GSM1900 bands
•
DO NOT use the system in hazardous environments
•
DO NOT expose the system to high humidity, chemical environments or mechanical impact
• DO NOT attempt to repair the system yourself - any repairs must be carried out by fully quali-
fied personnel only
The EPIR2 comes with its own power supply unit so you can plug it in straight away.
The unit is not meant for outdoor use, i.e. you should use it inside a building and the
power supply must be plugged into a standard Euro 2-pin socket or UK 3-pin socket
(depending on the version you have bought). The main circuit should be protected by
short circuit or over-current protection.
Please use the power supply unit which comes with your EPIR2, as it meets the EN
60950-1 standard. Any additional device you connect to the system, such as a com-
puter, must also be powered by an EN 60950-1 approved supply.
Disconnect the mains power before installing. Never install or carry out maintenance
during stormy weather. The electric socket that powers the system must be easily
accessible. In case of power cut, the system is powered by a back-up battery.
WARNING: Only use the approved 8.4V 250mAh rechargeable Ni-Mh 6HR61
(IEC)/7.2H5 (ANSI/NEDA) back-up battery with the system to avoid fire or explosion.
Take care when connecting positive and negative battery terminals.
To switch the system off, unplug the external electric power supply and disconnect
the battery by first removing the front cover of the device. A blown fuse cannot be
replaced by the user. The replacement fuse has to be of the kind indicated by the
manufacturer (fuse F1 type – C1S 2.5A).
If you use a computer to select your ideal settings, it must be earthed.
The WEEE (Waste Electrical and Electronic Equipment) symbol on this product (see
left) means it must not be disposed of in household waste. To prevent possible harm
to human health and/or the environment, you must dispose of this product in an
approved and environmentally safe recycling facility. For further information contact
your system supplier, or your local waste authority.