Eldes EPIR2 Скачать руководство пользователя страница 54

Страница: 54 / 64

EPIR2 User Manual v.1.4

5.4. How to reset the system to default settings

1. Unplug USB cable (if any)

2. Open EPIR2 enclosure.

3. Press and hold the RESET button.

4. Wait for the LED to flash quickly several times.

5. Power down EPIR2.

6. Power up EPIR2.

7. Configuration has been restored to default.

5.5. How to upgrade the firmware locally via USB connection

1. Disconnect the power supply and backup battery..

2. Open EPIR2 enclosure.

3. Connect EPIR2 to the PC via USB cable.

4. Press and hold the RESET button.

5. Connect the power supply.

6. Release the RESET button after the new window pops-up containing a .bin file. Otherwise open

My Computer

and look for

Boot Disk

drive.

7. Delete the .bin file located in this drive.

8. Copy and paste in the very same window.

9. After the copying is done, power down EPIR2.

10. Unplug USB cable.

11. Power up EPIR2.

12. Firmware upgraded.

5.6. How to upgrade the firmware remotely via GPRS connection

FOTA

EPIR2 alarm system supports FOTA (firmware-over-the-air)

feature. This allows to upgrade the firmware remotely via

GPRS connection. Once the upgrade process is initiated, the

system connects to the specified FTP server address where

the firmware file is hosted and begins downloading and re-

flashing the firmware. The firmware file must be located in a

folder titled

Firmware

. In order to initiate the upgrade pro-

cess, please, send the following SMS message.

SMS

SMS text:

XXXX_FOTA:ftp-server-IP,port,

firmware-file-name.bin,user-name,password

Value: ftp-server-IP - IP address of FTP server

where EPIR2 firmware file is stored; port - port

number of FTP server (usually - 21); firmware-fi-

le-name.bin - name of the firmware file, allowed

max. length - up to 31 character; user-name - user

name of FTP server login, allowed max. length - up

to 31 character; password - password of FTP server

Example: 1111_FOTA:84.15.143.111,21,EPIR2fw.

bin,eldesuser,eldespassword

Содержание EPIR2

































































Результаты поиска

Содержание EPIR2

Отзывы:

Похожие инструкции для EPIR2

Бренды по названию

Популярные бренды

Eldes EPIR2, Руководство пользователя

Результаты поиска

Содержание EPIR2

Отзывы:

Похожие инструкции для EPIR2

Бренды по названию

Популярные бренды