ELCOM Euro 500TE Handy, Руководство пользователя, Страница: 37 / 76

Euro 500TE Handy © Elcom, s. r. o.
37
Operations in registration mode
Operations in registration mode
The functions that are described in the fol-
lowing chapters can be used in the registration
mode. All financial transactions are stored in
this mode. If the cash register allows you to use the train-
ing mode, you can try the following functions
in the training mode first (sales data are not
stored in the memory).
Recommended procedures for a manager at the beginning of the day
1) Check if there is enough paper on the print-
er roll for the day. Insert a new paper roll, if
necessary.
2) Print an “X” report and make sure that:
a) date and time are correct,
b) daily report was executed.
3) Check whether there is enough cash in
drawer.
4) Register the initial cash put into the drawer
by pressing the ( RA ) button.
Printing modes
The Euro-500TE Handy cash register allows
you to choose a printing mode according to
two basic criteria: printing speed and pow-
er consumption. One font is included in the
Euro-500TE Handy, its height is 3 mm.
There are three printing modes of the Euro-
500TE Handy:
1) Normal normal printing saturation,
normal power consumption. This mode is
set as default.
2) Economical printing saturation is nor-
mal, the printing speed is a little bit lower
than normal. Power consumption is lowest
in this mode. This mode allows the longest
possible use of the cash register without an
external power supply.
3) High speed printing saturation is nor-
mal, printing speed is much higher than
normal. Power consumption is highest in
this mode. This mode takes advantage if
sales cadence is high. The discharge of the
internal lead-acid accumulator is much
higher than in normal mode, so that the
cash register can work without external
power supply less time than in normal
mode.
Use the sixth system flag to set-up printing
modes.
If the cash register is not powered from an ex-
ternal power source, printing saturation may
be a little lower, depending on the charge of
the internal lead accumulator.
Status and functions required at the beginning of registration
If a key is used for two functions, choose the
function in the lower part of the key by simply
pressing the key and choose the function in the
upper part of key by holding the (
Shift ) key
and pressing the key.
Error warning: Clear button
If a function key is used incorrectly or the reg-
istration range is exceeded, the machine issues
an error beep and an error message appears on
the display. To recover and correct the condi-