ELCOM Euro 500TE Handy, Руководство пользователя

Страница: 16 / 76

Euro 500TE Handy © Elcom, s. r. o.
16
ECR description
Cashier display description
The cashier display in Euro-500TE Handy is
two-row alphanumeric LCD display. Each row
can display up to twenty characters. Alphanu-
meric means that the display elements are ca-
pable of displaying both numerals and letters
– therefore the reading of such display is much
easier.
The cashier display is equipped with back-light
by default.
Customer display description
The customer display in this ECR is LCD dis-
play with ten large segments and three arrow-
like segments. Large segments show mainly
quantities and prices, but can also show text.
ECR uses this display to show prices only.
Display back-light controls
The cashier display is equipped with back-light
by default, the customer display back-light is
optional. Ask your authorised service techni-
cian for installation of display back-light.
The back-light increases the ECR power con-
sumption and shortens the time when the
ECR is operational solely on its internal accu-
mulator. Therefore it is quite simple to toggle
the back-light. If the back-light is on, it will be
turned off if no key is pressed within fifteen
seconds and will be turned back on if any key
is pressed.
Toggling the back-light functionality:
1. Enter “X” mode by pressing
A
keys.
2. Press
a
key to toggle the display
back-light on or off.
It is possible to select an ECR mode by press-
ing a combination of keys: – and
A
( Mode ).
The ECR operator can enter various modes in
this way and perform multiple tasks (registra-
tion, programming, reports…).
R Registration mode. This mode is used
for registration of transactions. In this mode,
the cashier display shows date/time until you
actually begin registering. Use
A
key combi-
nation to enter “R” mode.
X X-report mode is used to print sale
overviews. This mode doesn’t erase data from
which it made the overview. Enter “X” mode
by pressing
A
.
Z Z-report mode is used to print over-
views that clear the data they were extracted
from. Enter “Z” mode by pressing
A
.
P Programming mode is used to pro-
gramme all the values in the ECR. Separate
chapter is dedicated to this mode. Enter “P”
mode by pressing
A
.
12:00:00
X MODE
12:00:00
Z MODE
12:00:00
PROGRAMMING MODE P
Figure 2.5 >>
Division of segment
LCD display.
12:00:00
Friday 01/01/2001
"SSPXT
/VNFSJDQBSU
12:00:00
Friday 01/01/2001
Description of displays
Specifying ECR modes