ELCOM Euro 500TE Handy, Руководство пользователя

Страница: 29 / 76

Euro 500TE Handy © Elcom, s. r. o.
29
ECR programming manual
The Euro-500TE Handy cash register has 30
departments (DPTs) available for program-
ming. Each department has three basic com-
ponents:
1) Price
2) department flag
3) name
Department programming procedure:
1) Switch the cash register into the P mode by
pressing
4A
.
2) Press the
h
( DPT ) button. The depart-
ment number along with PRICE label ap-
pear in the first display row and its price
appears in the second display row.
3) Enter the new price (maximum eight digits
including decimals). If you make a mistake,
use
F
( Clear ) button to make correc-
tions.
4) Press the
D
( Subtotal ) button and con-
tinue with flag programming of the current
department. The display will show the cur-
rent department number and label
FLAGS
in the first row and its current flags in the
second row. The programming of depart-
ments can be finished at any time by press-
ing the
E
( Total ) button (next steps will
not run).
5) Enter the department flag value for the cur-
rent department according to the table 3.18
and press the
D
( Subtotal ) button. Use
F
( Clear ) key to correct mistakes.
6) Press
D
( Subtotal ) key to continue
with department name. The ECR display
will show the current department number
along with
NAME label in the first display
row and its current name in the second
one. The programming of departments
can be finished at any time by pressing the
E
( Total ) button (following steps will
not run).
7) Enter the name of the department.
The department name can have up to
14 normal/7 double-width characters. You
can use
F
( Clear ) key to correct mis-
takes. See the end of this chapter for in-
structions on entering texts.
8) Press the
D
( Subtotal ) button to con-
tinue with programming of next depart-
ment; continue with step 3. Finish depart-
ment programming by pressing the
E
( Total ) button.
Correcting departments
1) Switch the cash register into the P mode by
pressing
4A
.
2) Enter the selected department number
(130) and then the
h
( DPT ) button.
3) Continue with correcting of departments
as shown above.
1. DPT PRICE
10.00
1. DPT FLAGS
00038
Digit Default value Meaning Valid values
1 0
Assignment of department to a tax
level 0 – DPT withou tax level, 1–6 – DPT
assigned to respective tax level (1–6)
2 0 Department type
0 – ordinary department, 1 – single
item sale department
3 0 Negative department 0 – no, 1 – yes
4 3 Sale options
0 – sale forbidden, 1 – price entry from
keyboard allowed, 2 – pre-programmed
price allowed, 3 – both keyboard entry
and pre-programmed values are allowed
5 8
Maximum number of digits that can
be entered when entering a price in
this department (HALO)
0–8
1. DPT NAME
10% Soft drinks
< Table 3.20
Meaning of the depart-
ment flags.
Departments programming