ELCOM Euro 500TE Handy, Руководство пользователя, Страница: 25 / 76

Euro 500TE Handy © Elcom, s. r. o.
25
ECR programming manual
part of the tax rate and the last two digits
represent the decimal part of the tax rate
(for VAT 19  it is 1 9 0 0).
4) Press
D
( Subtotal ) button to set the
tax name programming (description of the
tax).
5) After finishing the tax rate programming,
the rate of the tax will appear in the first
line of the display and the name of the tax
in the second line (VAT 10, VAT 23,
TAX 10 etc.). The name of the tax level
can contain up to ten characters of stand-
ard size.
6) Enter the name of the tax and press the
D
( Subtotal ) button. After pressing the
button, continue in programming of the
next tax levels. For example if the name of
the tax is, e. g., VAT 10, press the keys
in the following sequence:
K
+3 ×
8
,
K
+
2
,
K
+
8
,
/
, 5 ×
1
, 6 ×
0
,
4 ×
1
. To enter the capital letters of the al-
phabet hold the
K
( Shift ) key and press
the particular key.
The cash register allows the use of six tax levels
plus one untaxed level. Both the tax level rate
and its name are programmable. The seventh
rate is not programmable.
A tax rate consists of two programmable data:
1) Tax rate (0 , 19  or 23 )
2) Tax name (TAX, VAT, TAXABLE)
Programming procedure:
Tax rate can be changed only if total (daily) and
periodical report were executed in the Z mode.
If you need to deactivate the particular tax lev-
el, program its rate higher than 100.00 .
1) Switch the cash register into the P mode by
pressing
4A
.
2) Press the
KG
( Refund ) button. The
number of the programmed tax level and
its rate will appear on the display.
3) Enter the tax rate without a decimal point.
The first two digits determine the integer
In the programming mode, select electron-
ic journal flags programming by pressing the
KB
( Discount ) button. After pressing
the
C
( Check ) button flags values will be
printed. It is possible to print the value of the
particular flag by pressing the
g
( Receipt )
button.
1. tax level RATE
10.00%
1. tax level NAME
VAT 10%
Tax levels programming
Printing electronic journal flag settings
Digits 1 and 2 affect also the PLU bar-code
programming (if they‘re set to 1, this allows to scan the extended bar-code using scanner and
using the bar-code without its extension).
Digit Default value Meaning Valid values
3 0
Printing format and storage format in PC
journal if ECR reads and successfully looks
up the 13+5 bar-code
0 – do not store and print
anything, 1 – print and store
only bar-code extension,
2 – print and store entire bar-
code
4 0
Printing format and storage format in PC
journal if ECR reads and successfully looks
up the 13+2 bar-code
5 0
Printing format and storage format in PC
journal if ECR reads and successfully looks
up bar-code with other length than 15/18
or if a PLU has been read using the PLU
number that has length 15/18 and ECR
database contains the same EAN code with
given length (i. e. it is not considered an
EAN 13+2/13+5 code)
0 – do not store and print
anything, 1 – print and store
entire 18-digit long code pro-
grammed for given PLU