ELCOM Euro 500TE Handy, Руководство пользователя

Страница: 24 / 76

Euro 500TE Handy © Elcom, s. r. o.
24
ECR programming manual
Flag 5 - electronic journal flag
number of labels, and then after pressing sub-
total printing is started out.
If no. 2 is set to 4, bar code assigned to PLU is
printed only in the case of preprogrammed bar
code for this PLU.
The price is encoded with number of places ac-
cording to digit no. 5. The amount is encoded
according to number of decimal spaces speci-
fied in system flag no. 2, digit no. 3 if the same
flag’s digit no. 2 is set to 2.
It is not possible to include negative price to
the bar-code, therefore in refund and void op-
eration is printed
Refund or Void before print-
ing PLU bar code. If the final price of the sale
is negative,
NEGAT. PRICE message is printed
before printing bar code.
The prefixes 26, 28 or 29 are recommended for
amount encoded bar-codes, prefixes 21, 24 or
27 are recommended for price encoded bar-
codes.
Digit Default value Meaning Valid values
1-2 00 Bar-code prefix 00-99
3-6 0001
PLU number for encoding the final
price into bar-code
0001-9999
Digit Default value Meaning Valid values
1 0 Allow refunds
0 – all cashiers are allowed to refunds,
1-6 – specifies which cashier is allowed
to refunds
2 0 Bar-code printing
0 – without bar-code, 1 – print bar-
code with final price at the end of
receipt, 2 – print code for every PLU
with encoded amount, 3 – print code
for every PLU with encoded price,
4 – print programmed bar-code for
every PLU
3 1
Number of empty rows after print-
ing the bar-code
0-9
4 1 Print numerals in bar-code
0 – bar-code will not contain numerals,
1 – bar-code will contain numerals
5 2
Number of decimal places for en-
coding price into bar-code
0-3
6 5
Maximum number of places for en-
coding price into bar-code
1-5
Table 3.14 >
Meaning of the 4t
electronic journal flag.
Table 3.15 >
Meaning of the 5t
electronic journal flag.
Flag 6 - electronic journal flag
Table 3.16 >
Meaning of the 6t
electronic journal flag.
Digit Default value Meaning Valid values
1 0
Look-up algorithm for PLUs when reading
18-digit long bar-code
0 – look-up using the entire
bar-code, 1 – as option 0, but
if look-up fails, the bar-code
is considered EAN 13+5 and
look-up ignores extension
2 0
Look-up algorithm for PLUs when reading
15-digit long bar-code
0 – look-up using the entire
bar-code, 1 – as option 0, but
if look-up fails, the bar-code
is considered EAN 13+2 and
look-up ignores extension