ELCOM Euro 500TE Handy, Руководство пользователя, Страница: 26 / 76

Euro 500TE Handy © Elcom, s. r. o.
26
ECR programming manual
Up to six lines of logo may be printed at the
beginning of the receipt (e. g. Roys Food Store,
Thank you).
Euro-500TE Handy can print lines that con-
tain up to 24 normal-sized characters or up to
twelve double-sized characters.
You can find more information about writing
texts in a subchapter at the end of this chapter.
Logo programming procedure:
1) Switch the cash register into the P mode by
pressing
4A
.
2) Press the
KH
( PO ) button.
3) The display will show first logo line in the
first display line. The notification says that
first line of the logo is programmed. The
programmed text will appear In the second
line. Enter the new data for the whole logo
line. If you make a mistake during the pro-
gramming, correct the previous character
by pressing the
F
( Clear ) button.
7) To finish the programming of taxes press
the
E
( Total ) button.
You can find more information about writing
texts in a subchapter at the end of this chapter.
Correction of tax levels
Tax values can be changed only if a daily (to-
tal) and a monthly (periodical) report were ex-
ecuted.
1) Switch the ECR into the P mode by press-
ing
4A
.
2) Enter the number of the tax level to edit
and press the
KG
( Refund ) button.
3) Re-programme the parameters as described
earlier.
4) You can review all your changes in print by
pressing
C
( Check ).
5) You can finish the repairs by pressing
E
( Total ).
Printing of the programmed tax
values
To verify the programmed values, print them
by pressing the
C
( Check ) button in the
tax programming mode. If working in anoth-
er programming mode, press the
KG
( Re-
fund ) button and then the
C
( Check ) but-
ton. It is possible to print the rate and name
of a particular tax level by pressing the
H
( EAN ) button.
1. logo line
E u r o - 5 0 0 T E
Logo programming
4) Press the
D
( Subtotal ) button. The dis-
play will show next line that will be pro-
grammed.
5) Finish the logo programming by pressing
the
E
( Total ) button.
Correcting a logo row
1) Switch the ECR into the P mode by press-
ing
4A
.
2) Enter the number of the logo row to edit
and press the
KH
( PO ) button.
3) Re-programme the texts as described ear-
lier.
4) You can review all your changes in print by
pressing
C
( Check ).
5) You can finish the repairs by pressing
E
( Total ).
Printing the programmed logo
rows
To print the logo and check the correctness of
programming, press the
C
( Check ) button.
Printing of a particular logo line is possible by
pressing the
H
( EAN ) button.
Cashiers programming
The cash register allows for six independent
cashiers. The programming of cashiers consists of three
steps: