35
CORRECT REPLACEMENT OF THE SEMI-RAPID BURNERS
It is very important to check that the burner flame distributor
“
F
” and the cap “
C
”
has been correctly positioned (see figs.
7.1 - 7.2) - failure to do so can cause a poor burner flame
and/or damage to the burner and hob.
Check that the electrode “
S
” (figs. 7.1 - 7.3) is always clean to ensure trouble-free
sparking.
Check that the probe “
T
” (figs. 7.1 - 7.3) next to each burner is always clean to ensure
correct operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
The burners become very hot during operation. Keep children away.
Fig. 7.2
F
C
Fig. 7.1
BURNERS AND PAN SUPPORTS
They can be removed and washed with soapy water only.
They will remain always perfect if cleaned with products used for silverware.
After cleaning or wash, check that burner-caps and burner-heads are dry before placing
them in the
respective housings
.
It is very important to check that the burner flame distributor and the cap has been cor-
rectly positioned - failure to do so can cause serious problems.
Note: The electrode
“
S
”
must be very carefully cleaned. To avoid damage to the
electric ignition do not use it when the burners are not in place.
Ignitor “
S
”
Sensor “
T
”
1
1
3