47
8
INSTALLATION
FOR THE INSTALLER
Location
This cooker has
class “2/1”
overheating protection so that it can be installed next to a
cabinet.
The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in
a room or space containing a bath or a shower.
The appliance must not be installed in a bed-sitting room of less than 20 m
3
.
The appliance is designed and approved for domestic use only and should not be installed
in a commercial, semi commercial or communal environment.
Your product will not be guaranteed if installed in any of the above environments and
could affect any third party or public liability insurances you may have.
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered synthetic material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
The cooker must be installed by a qualified technician and in compliance with local safety
standards.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop,
a gap of at least 200 mm must be left between the side of the cooker and the furniture.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated in fig. 8.1.
If the cooker is located
on a pedestal it is
necessary to provide
safety measures to
prevent falling out.
Note:
please consider
the side opening of the
bottom left door when
installing the cooker.
Once installed you
should be able to open
the oven door.
200 mm
650 mm
500 mm
450 mm
Fig. 8.1
