32
AUTOMATIC COOKING
Use automatic cooking to automatically turn the oven on, cook, and then turn the oven off.
1. Check the clock shows the correct time.
2. Select the function and temperature (function and temperature knobs). The oven will
come on.
3. Decide how long the food will take to cook, allowing time for preheating if necessary.
4. Touch the “
MODE
” key for more than 2 seconds and then touch again. “
dur
” will show
(duration). Using the “
+
” and “
–
” keys, set the stop time.
5. Decide the time you would like the oven to turn off; touch the “
MODE
” key for more
than 2 seconds and then touch it two times again. “
End
” will show. Using the “
+
” and
“
–
” keys, set the stop time.
Note:
While “
dur
” is displayed you can change to “
End
” just by touching one time the
“
MODE
” key (within 8 seconds from the last selection).
If there is time to wait before cooking starts, the current time of day and “
AUTO
” will show
in the clock display. The oven will switch off but is now set for automatic cooking.
If you are already at home to turn the oven on and only want the oven to turn off
automatically, start cooking as normal, then follow step 4 or step 5 to set a time to stop
the oven.
When automatic cooking starts, “ ” will be displayed and the oven will turn on.
- To see the remaining cook time, follow step 4 up to display “
dur
” (duration).
- To see the set stop time, follow step 5 up to display “
End
”.
- To cancel automatic cooking at any time, touch the “
+
” and “
–
” keys simultaneously (for
more than 2 seconds) and turn the temperature and function knobs to the off position.
When the stop time is reached, the oven will turn off, the timer will beep and “
AUTO
” will
flash:
- Touch any key to stop the beeping.
- Touch the “
MODE
” key, for more than 2 seconds, to return the oven to the manual mode
(“ ” symbol steady illuminated on the display).
- Turn the temperature and function knobs to the off position.
Attention: after a power failure any automatic program is deleted. Turn off the oven
manually.
SETTING THE TIMER VOLUME
You can select from three volume levels.
- Touch the “
+
” and “
–
” keys simultaneously for more than 2
seconds.
- Touch the “
MODE
” key; you can read on the display the current
timer volume (“
ton1
”, “
ton2
” or “
ton3
”).
- Touch the “
–
” key to listen or change the timer volume.
- Timer volume activated: the last displayed.
- After about 8 seconds an acoustic signal (“
beep
”) will sound confirming the volume
setting; then the time of day will be displayed.