65
Fig. 10.7a
J
F
Fig. 10.8
REPLACEMENT OF THE INJECTORS
Select the injectors to be replaced ac-
cording to the “Table for the choice of the
injectors”.
If the injectors are not supplied they
can be obtained from the “Service
Centre”.
REPLACEMENT OF THE INJECTORS OF
THE COOKTOP BURNERS
To replace the injectors proceed as fol-
lows:
• Remove pan supports and burners
from the cooktop.
• Using a wrench, substitute the nozzle
injectors “
J” (figs. 10.7a, 10.7b) with
those most suitable for the kind of gas
for which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
ADJUSTING OF THE MINIMUM OF THE
TOP BURNERS
In the minimum position the flame must
have a length of about 4 mm and must
remain lit even with a quick turn from the
maximum position to that of minimum.
The flame adjustment is done in the fol-
lowing way:
• Turn on the burner.
• Turn the tap to the MINIMUM position.
• Take off the knob.
• With a thin screwdriver turn the screw
“
F” until adjustment is correct (fig.
10.8).
N.B. For LPG (G30/G31) the by-pass
screw must be fixed thoroughly.
Auxiliary,
semi-rapid
and rapid
burners
J
Triple-ring
burner
Fig. 10.7b
