62
Manifold
male
pipe fitting
Inlet pipe
Hose holder
for LPG
Hose clamp
(not supplied)
LPG
Rubber hose (not supplied)
for LPG connection
(internal diameter 6 mm)
1/2” G cylindrical
(ISO 228-1) male
1/2” G cylindrical
(ISO 228-1) female
Sealing
washer (#)
(#) If not already fitted on the inlet pipe,
it is supplied with the appliance in a
separate kit
Fig. 10.5
GAS CONNECTION WITH RIGID PIPES OR A FLEXIBLE PIPE
The gas connection is made up of:
•
the terminal fitting of the inlet pipe (right-hand or left-hand);
•
sealing washer.
Important!
If fitted, remove the hose holder from the terminal fitting of the inlet pipe.
When connecting the cooker to the gas supply with rigid pipes or a flexible pipe,
make sure that
Gas connection with rubber hose holder
Note: if not already fitted on the inlet pipe, the hose holder is supplied
with the product in a separate kit; if not supplied with the appliance
it can be purchased by contacting the After-Sales Service.
(Important: to be used ONLY IF PERMITTED by the local applicable regulations)
After connecting the cooker to the gas supply, make sure that you
•
check that the connections are correctly sealed using a soapy solution, but never a
naked flame.
•
check whether the injectors are correct for the type of gas being used.
•
replace the sealing washer on the slightest sign of deformation or imperfection. The
sealing washer is the part which guarantees a good seal in the gas connection.
•
use two spanners when fitting the hose holder (Fig. 10.5).
