EKOM DK50 4x4VRT/M, Руководство пользователя

Страница: 21 / 74

INSTALLATION
03/2021 21 NP-DK50-Nx4VRTM-AD-A-EN-4_03-2021
INSTALLATION
Risk of incorrect installation.
Only a qualified technician may install the compressor and place it into operation
for the first time. Their duty is to train operating personnel on the use and
maintenance of the equipment. An entry is made in the equipment installation
record to certify installation and operator training. (see the Annex chapter)
9. INSTALLATION CONDITIONS

The compressor may only be installed and operating in dry, well-ventilated and clean
environments under the conditions specified in the Technical Data chapter.
Risk of damage to the device.
The equipment may not be operated outdoors or in otherwise wet or damp
environments.
Risk of explosion.
Do not use the equipment in the presence of explosive gases, dust or
combustible liquids.

The compressor must be installed so that it is accessible at all times for operating and
maintenance. Please ensure that the nameplate on the device is readily accessible.

The compressor must stand on a flat, sufficiently stable base (be aware of the weight of the
compressor, see the Technical Data chapter).

The compressor on the operator’s side must be at least 70 cm from the wall to allow air flow
for cooling purposes and to ensure the safety of the operator and maintenance personnel.

Approximately 70% of the electrical energy used by the compressor aggregates is converted
to heat, and therefore the rooms in which the compressor is installed must have additional
ventilation to provide sufficient air exchange for cooling purposes (see the Technical Data
chapter).
Burn or fire hazard! Caution! Hot surface!
Portions of the compressor, dryer and connecting hoses between the dryer and
compressor may be hot and reach hazardous temperatures during compressor
operation that may harm materials or operating staff.
High temperature hazard
Placing air flow impediments upstream or downstream of the cooler is prohibited.
The temperature of internal and external parts of the equipment may rise to
hazardous levels.
You may notice a “new product” odour when you first place the product into
service (for a short period of time). This odour is temporary and does not impede
the normal use of the product. Ensure the space is properly ventilated after
installation.