EKOM DK50 4x4VRT/M, Руководство пользователя

Страница: 58 / 74

PRODUCT MAINTENANCE
NP-DK50-Nx4VRTM-AD-A-EN-4_03-2021 58 03/2021
Use of aggressive detergents and disinfectants containing alcohol and chlorides
can lead to surface damage and discolouration.
AD dryer maintenance
17.15. Venting pressure from the dryer
The equipment is designed to permit the safe venting of pressure within 10 seconds after the
compressor is shut off.
If pressure is not automatically vented from the dryer, then the pressure may be vented manually.
Venting compressed air poses an injury hazard
Wearing hearing protection is recommended given the noise generated by the
venting process.
Shut off the compressed air source before venting pressure from the equipment
Venting pressure using the display screen
Press ESC+▼ in the display screen to vent pressure from the equipment.

First, shut off the compressed air source.

Then press and hold ESC+▼, which will open all the solenoid valves (inlet and regeneration)
for 10 seconds and then vent the pressure from the equipment and connected pneumatic
circuits and elements that are not separated from the equipment by the check valve
Manual venting of pressure

Turn off the compressor.

Open the vent plugs on the outlet module on the equipment (Fig. 30).
Fig. 30: Venting pressure from the dryer chambers

Disconnect the hose (2) from the lower part of the condensate separator (3) (Fig. 31).