EKOM DK50 4x4VRT/M, Руководство пользователя

Страница: 33 / 74

INSTALLATION
03/2021 33 NP-DK50-Nx4VRTM-AD-A-EN-4_03-2021
Ethernet connection
The compressor may be connected to an Ethernet 10/100 M network via the controller as follows:
1 Use the RJ-45 connector on the switchboard door to connect a cable to the Ethernet
network.
2 The user shall then request IT staff to connect
the compressor to the customer’s Ethernet
network. The equipment’s default IP addresses are: BM=192.168.0.3, TDE=192.168.0.2,
sub-mask =255.255.255.0.
3 The user shall request the configuration of IP addresses (specific or requested) from the
manufacturer before the compressor is shipped.
4 The user then configures the IP addresses (specific, requested) based on the manual (see
the service manual) or uses the compressor manufacturer’s technical support for such
purposes.
Web server
The controller has an integrated Web Server function that facilitates compressor monitoring via a
PC, smartphone or tablet using a conventional web browser (Mozilla, Opera, Safari, Google
Chrome, etc.)
The process for logging into the Web Server function once the compressor is connected to an
Ethernet network is as follows:

Open the web browser on a PC,
smartphone or tablet and enter the IP
address of the controller (in this case
192.168.0.3).

Enter the password “LOGO” and click
on the “LOG on” button.

After logging in, the browser displays
the first screen showing the system
information for the controller itself:
module generation, type, firmware
(FW), IP address and activity status.

Click on the “LOGO! BM” function in the
browser to display the current virtual
status of the display screen. Navigate
through the screen using the ESC and
cursor keys the same as on the real
display.