EKOM DK 50 4X2VT/M, Руководство пользователя

Страница: 28 / 60

INSTALLATION
NP-DK50-Nx2VTM-ADM-EN-1_06-2022 28 06/2022
Potential for damage to
pneumatic components.
Ensure the air hoses are not
kinked.
13. ELECTRICAL CONNECTION
Unauthorised interference
hazard
Only a qualified electrician may
install electrical components!
Risk of damage to the device.
The operator is obliged to
provide
circuit protection
devices for the equipment per
the
specifications in valid
technical standards.
The product is delivered
without a power cord.
Cord type (minimum requirements) H05 VV-
F_ 5G10
Risk of electric shock.
Ensure full compliance with all
local electrical codes. The
mains voltage and frequency
must comply with the data
stated on the nameplate on the
equipment.
Fig. 12: Connecting the protective PE conductors

Connect the disconnected PE
protective conductors and then
the
grounding wire after
connecting (D).
Fig. 13: Connecting the electrical cables

Connect the disconnected
electrical cables (E) to the
terminal strips in the electric
motor boxes. Insert the cables
into the electrical installation
trays and enclose with a cover.