EKOM DK 50 4X2VT/M, Руководство пользователя

Страница: 29 / 60

INSTALLATION
06/2022 29 NP-DK50-Nx2VTM-ADM-EN-1_06-2022
Fig. 14: Connecting the power cord

Connect the TN-S mains to the power
supply terminal in the equipment’s
junction box (F). Connect the electrical
components to the mains in accordance
with the valid electrical standards and
regional regulations.
Fig. 15: Connecting the cable to the pressure switch

Connect the loose cord to the pressure
switch per the schematic, or Fig. 15,
tighten the screws and secure with
paint.
Fire hazard and risk of electric
shock.
Ensure the electrical cable does
not touch hot parts of the
device or connecting hoses.
14. COMMISSIONING

Make sure all transport stabilizers
were removed.

Check that all compressed air hose
connections are correct.

Ensure the power cord is properly
connected to the mains and the power
cable is connected to the dryer.

Check to ensure the outlet valve is in
the OFF position.

Check to ensure the hose from the