EKOM 447000001-066, Руководство пользователя

Страница: 44 / 72

OPERATION
NP-DK50-9x4VRTM-AD-EN-5_04-2022 44 04/2022
SERVICE ACCORDING TO
INSTRUCTIONS FOR USE
TOTAL HOURS - total time the equipment
has been connected to power
RUN HOURS - average operating hours of
the equipment
The display flashes orange.
Note: Press F1 to switch to the normal
operating mode screen for 60 seconds.
The compressor supplies air to the
compressed air system as needed and
without restriction.
Call in service personnel to perform the
required service.
Note: Only service personnel are authorised
to configure a new service interval.
Press F4 and hold for at least 5 seconds to
confirm
the completion of
maintenance/service.
The display then changes to the normal
operating mode screen.
This indicates the new maintenance interval
has been set on the controller from this time
forward.
Any maintenance or service work
must
be recorded in the
compr
essor’s service log.
•
Compressor module ambient
temperature exceeds the limit.
WARNING - high ambient temperature
alarm.
The display flashes orange.
This alarm appears if the ambient
temperature exceeds the 40°C limit for at
least 30 seconds. The air pumps operate
normally.
The display otherwise shows the current
ambient air temperature.
The alarm clears when the temperature
drops below the limit.
The compressor supplies air to the
compressed air system as needed and
without restriction.