EKOM 447000001-066, Руководство пользователя

Страница: 39 / 72

OPERATION
04/2022 39 NP-DK50-9x4VRTM-AD-EN-5_04-2022
•
Motors are on
PRESSURE - current working pressure
TEMP_OUT - ambient temperature around
the compressor
The third row shows any active blowdown.
RUN MODE
– all air pumps are switched on
RUN HOURS: operating hours average
TIME-TO-GO MN - time to the next
maintenance / service work (in hours).
•
Motors are switched off
PRESSURE - current working pressure
TEMP_OUT - ambient temperature around
the compressor
The third row shows any active blowdown.
STANDBY MODE
– all air pumps are
switched off
RUN HOURS: operating hours average
TIME-TO-GO MN - time to the next
maintenance / service work (in hours).
SECTION_A - operating hours for air pump
M1 / section A /
SECTION_B - operating hours for air pump
M2 / section B /
SECTION_C - operating hours for air pump
M7 section C /
AVERAGE HRS - operating hours averaged -
(M1 + M2 + M7) / 3
The pressure sensor monitors the pressure in
the air tank. The pressure is shown on the
display.
Check all air line connections and
check for compressed air leaks.
Remedy
all leaks that are
identified.
Slowly open the outlet valve to the ON
position. The compressor starts and runs until
the pressure in the entire compressed air
system stabilises. The air pumps then
gradually turn off at the switching pressure.
Complete a record for the installation of the
compressor assembly and commissioning
(see the Annex chapter).
Shutting down the compressor
Press the STOP button (18) to shut down the