EKOM 447000001-066, Руководство пользователя

Страница: 57 / 72

PRODUCT MAINTENANCE
04/2022 57 NP-DK50-9x4VRTM-AD-EN-5_04-2022
Venting compressed air poses an
injury hazard
Wearing hearing protection is
recommended given the noise
generated
by the venting
process.
Shut off the compressed air
source before venting pressure
from the equipment
Venting pressure using the display screen
Press ESC+▼ in the display screen to vent
pressure from the equipment.
•
First, shut off the compressed air
source.
•
Then press and hold ESC+▼, which
will open all the solenoid valves (inlet
and regeneration) for 10 seconds and
then vent the pressure from the
equipment and connected pneumatic
circuits and elements that are not
separated from the equipment by the
non-return valve.
Manual venting of pressure
•
Turn off the compressor.
•
Open the vent plugs on the outlet
module on the equipment (Fig. 34).
Fig. 34: Venting pressure from the dryer chambers
•
Disconnect the hose (2) from the lower part of the condensate separator (3) (Fig. 35).
Fig. 35: Venting pressure from the cooler and condensate separator
The process of manually venting pressure
from the equipment is complete after
approximately 2 minutes