_ Gas oven _ rev. 6 _________________________________________________MOD. KF 1001G – KF 1001G-HT
KF 1001G IX AL – KF 1001G IX AL-HT
_________________________________________________________________________________________ page 5 _
1.
1.
1.
1. DESCRIPTIONS AND GENERAL WARNINGS
DESCRIPTIONS AND GENERAL WARNINGS
DESCRIPTIONS AND GENERAL WARNINGS
DESCRIPTIONS AND GENERAL WARNINGS
The model convector oven bears (KF 1001G KF 1001G IX AL) an official CE mark, issued by a
Notified Body, entrusted with and responsible for evaluating the observance of the essential
requirements specified by Gas Directive 90/396/EEC. The oven and the quality of the production
system are subjected to regular surveillance by means of inspection checks in order to ascertain
their conformity to the type certificate specified by the above mentioned Directive.
Moreover, the appliance conforms to the following EU Directives:
-
2006/95EC Low Voltage Directive.
-
2004/108/EC Electro-magnetic Compatibility Directive.
This appliance may be marketed in all the European countries whose abbreviated reference is
present on the technical data-plate. The appliance must be installed to conform with the local
laws on the installation of electrical-gas appliance for collective use, and shall include the
accessories and functional adaptations required in the destination countries, which are
described in the original language in the use and maintenance handbook.
In particular, the oven must be installed on a perfectly flat table in a sufficiently ventilated
room and must be used by specialised personnel only. To convey the fumes to a suction hood,
connect, if necessary, a vertical cylindrical tube of appropriate size to the oven’s flue connector,
using an suitable adapter. The oven is A
1
type, i.e. combustion air is taken directly from the
installation environment and burned gasses are exhausted directly into the said environment -
we recommend you to place it under an efficient hood to exhaust cooking vapours and
combustion fumes.
The oven has an atmospheric burner and a heat exchanger for heating the cooking
compartment. Heat is diffused by an internal two-way fan. Temperature is programmed by an
analog thermostat, and cooking time by a timer.
Vapour can be produced inside the compartment by pressing a push-button which activates
an solenoid-valve connected to a water sprayer. If the burner does not ignite, a red shut-down
indicator-light is lighted. By using the reset push-button, the burner can be re-ignited quite
safely. If the baking compartment is heated excessively or non-uniformly, a safety thermostat is
tripped preventing supply of gas and electrically disabling the oven – the thermostat can be
reset only manually after removing the door on the right panel.
1.1
1.1
1.1
1.1
General warnings
General warnings
General warnings
General warnings
Very important!: keep this instruction book together with the appliance for future
consultation.
These warnings were drafted for your safety and for that of others. Please read them
carefully before installing or using the appliance:
-
If, on receipt of the goods, the packaging
packaging
packaging
packaging is damaged, write the following on the delivery
note: “I REVERSE THE RIGHT TO CONTROL THE GOODS
I REVERSE THE RIGHT TO CONTROL THE GOODS
I REVERSE THE RIGHT TO CONTROL THE GOODS
I REVERSE THE RIGHT TO CONTROL THE GOODS”, specify the damage and get
the driver to sign in acceptance; send a claim in writing to the seller within 4 calendar
days from the date of receipt. No claim shall be accepted after such period.
-
Read this handbook carefully: it supplies information on safe use, installation and
maintenance. The purpose of this manual is to provide information to operators on the
essential prescriptions and criteria to ensure their own safety and prolong the oven’s
operating life. This manual must be read by all personnel authorised to work on the
machine before it is started up. It must be stored together with the machine for all future
consultation. If the manual becomes worn or is mislaid, ask for another copy directly
from the manufacturer. These instructions are valid only for countries whose abbreviated
reference appears on the cover of this manual and on the data-plate.
