_TECNOEKA Srl___________________________________________________________ use and instruction manual _
_ page 16 _________________________________________________________________________________________
-
Do not wash the appliance with direct jets of water, because if water enters inside, this
could jeopardise the appliance’s safety.
-
Do not use corrosive substances (e.g. hydrochloric acid) to clean the oven top.
Cleaning the oven - We advise you to clean the oven interior at the end of every day of use.
This will make it easier to remove cooking residues, thus preventing them from burning when
the oven is used next. When the oven is quite cool, clean it carefully with hot water and soap or
with suitable commercial products.
Cleaning the oven door – (except to KF 1001G IX AL - KF 1001G IX AL-HT model) To clean
the oven door thoroughly, proceed as follows:
-
fully open the door;
-
hook the rings “A” onto the hinge seats (Fig. 10);
-
lift the door gently and withdraw it (Fig. 11).
Replacing oven lamp - Electrically switch off the appliance; unscrew the protective cap in
glass (Fig. 12); unscrew the lamp and replace it with another lamp suitable for high
temperatures (300°C) with the following characteristics:
Voltage: 230/240 V
Power:
15 W
Fitting:
E 14
Refit the glass cap and power up the appliance.
Fig. 10
Fig. 10
Fig. 10
Fig. 10
Fig. 11
Fig. 11
Fig. 11
Fig. 11
Fig. 12
Fig. 12
Fig. 12
Fig. 12
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT: At least once a year, arrange for a qualified technician to inspect the
At least once a year, arrange for a qualified technician to inspect the
At least once a year, arrange for a qualified technician to inspect the
At least once a year, arrange for a qualified technician to inspect the
appliances, with special reference to gas and electrical connections.
appliances, with special reference to gas and electrical connections.
appliances, with special reference to gas and electrical connections.
appliances, with special reference to gas and electrical connections. The
The
The
The
manufacturer declines any liability for direct or indirect damage caused by incorrect
manufacturer declines any liability for direct or indirect damage caused by incorrect
manufacturer declines any liability for direct or indirect damage caused by incorrect
manufacturer declines any liability for direct or indirect damage caused by incorrect
use, poor installation, maintenance or anything else specified in our sales conditions.
use, poor installation, maintenance or anything else specified in our sales conditions.
use, poor installation, maintenance or anything else specified in our sales conditions.
use, poor installation, maintenance or anything else specified in our sales conditions.
6
6
6
6.... TECHNICAL ASSISTANCE AND ORIGINAL SPARE PARTS
TECHNICAL ASSISTANCE AND ORIGINAL SPARE PARTS
TECHNICAL ASSISTANCE AND ORIGINAL SPARE PARTS
TECHNICAL ASSISTANCE AND ORIGINAL SPARE PARTS
Before leaving the factory, this appliance was tested and set up by expert, specialised personnel,
to ensure best operating results. Any eventual assistance or regulation must be done with
maximal care and attention, using original spare parts.
For this reason it is necessary to apply to the distributor that has done the sale, specifying the
type of inconvenience and model of the appliance purchased. The required parts for different
gas type adaptation are available along with the appliance at the moment of sale or delivery.
For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the
cover or going to
www.tecnoeka.com
www.tecnoeka.com
www.tecnoeka.com
www.tecnoeka.com.
