Eiki MCD-100, Руководство пользователя

Страница: 69 / 96

English
69
Control
Control
When you select Control from the main menu, Control Menu will appear at the bottom of the
screen. Using this menu, you can adjust or configure the projector.
Caution: Control items displayed on this screen is varied depending on the input source or product model
of the projector. So the figures shown in this section may be different from the actual screen
displayed on your computer. For further detail, refer to the owner's manual of your projector.
This function is not available if the projector is turned off.
Input
On this screen, you can select input source of the projector. Check the input terminal and select
the signal mode from the pull-down menu. Click Set button to switch the input.
You can save a note in Comment field. Click Save button to save the note.
Parameter Description
Wireless ............Select this input when using network
capture or viewer function.
Computer 2 ........Select the input source from RGB,
Component , and RGB (Scart)
Video ..................Select the input source from AUTO,
VIDEO, and S-CVIDEO.
Control Menu