Eiki MCD-100, Руководство пользователя

Страница: 44 / 96

44
8. Configuration with Browser
* Not shown when wired LAN card is attached.
Parameter Description
Firmware Version .............................. Shows the firmware version of this system.
Boot ROM Version ..........................Shows the boot ROM version of this system.
Wireless Card Type* ........................ Shows the countries in which the device can be used.
This unit is set to “US” and cannot be changed.
IP Address ......................................Shows the IP address currently set on this system. If DHCP is set, the
IP address assigned from the DHCP server is displayed.
Wireless Link Status*......................Shows the wireless communication mode and its status of this system.
WEP Security* ................................Shows the WEP (Encryption) setting status.
However, the WEP key is not shown.
Current SSID/ESSID* ......................Shows SSID set on this system.
Current Channel*......................Shows the channel, through which this system is currently
communicating.
Data Transfer Rate* ........................Shows the current wireless communication speed of this system. The
communication speed is automatically changed by the environment at
that time (11 Mbps, 5.5 Mbps, 2 Mbps, or 1 Mbps). The
communication speed cannot be set at a fixed rate.
Current User/PC ............................Shows the IP address of the personal computer, which is currently
transferring images to this system using MCI Client.
System Time ..................................Shows the elapsed time since the power is turned on.
The time can be reset by selecting “Reset” from the browser
configuration screen, or by disconnecting power from the projector and
connecting back on.
Projector ..........................................Shows the name of MCI attached projector. (Can be changed)
Refresh button ................................Refreshes the displayed data.
Parameters and descriptions of Information