Eiki MCD-100, Руководство пользователя

Страница: 3 / 96

English
3
Compliance
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures :
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
Model Number : MCD-100
Trade Name : EIKI
Responsible party : EIKI International Inc.
Address :
30251 Esperanza, Rancho Santa Margarita,CA 92688-2132
Telephone No. :
(800)242-3454 (949-457-0200)
For Canadian Users
This Class B digital apparatus complies with Canadian ICES-003.
Cet apparei numérique de la class B est conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de
brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même
si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
For French Users
Restricted frequency band only channels 10 through 11 (2457MHz and 2462MHz respectively) may be
used in France. License required for every installation, indoor and outdoor installations.
Please contact ART for procedure to follow. Do not use this wireless LAN card in the open air.
CAUTION
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to
operate the equipment.
Exposure to radio frequency
This product uses a wireless LAN card (CF Card) to communicate with other devices using the 2.4 GHz ISM
band. The radiated power output of this card is well below FCC radio frequency exposure limits. However,
it is advised to maintain a minimum 20 cm separation between the product and user(s) or bystanders to
minimize human exposure to the transmitted radio frequencies.